Lightning Protection Test & Inspection NVQ Level 3
Use the following example videos to help you create your own. Remember when creating your own videos:
- Always start your video showing the face of the person and saying their name
- Keep them under 3 mins at most (As short as possible is always better)
- Keep them to a specific task
- Make you have on the correct PPE when doing specific tasks
- If you make a mistake do not worry, just mention it, correct it and move on
- Have a little fun doing them, we don’t need Brad Pitt we need you to simply tell us what you are doing to do and how you are going to do it.
Example Video List
Table of Contents
V01 Documentation
Describe how you collect the job/task paperwork, explain what the paper work consists of (RAMS, specifications, materials list, plant & access equipment you need) the client’s details where & when you are meant to be there, what you do if there is anything you find that may be incorrect, or what you would do if you didn’t understand something?
V02 Planning/Scheduling
Describe how things are planned in how your company organises the work schedule, if your programme is for one site or include several site visits over a day/week, explain why it is important to keep to the plan and what might happen if you don’t, how do you speak to if there are issues/problems
V03 Back Of Van/Manual Handling
Back of van, show how you safely load & store materials, plant & access equipment, explain that when moving anything you take into consideration Manual Handling, breaking down loads perhaps using a wheelbarrow or another lifting aid to get it in back of van, or getting it delivered direct to site if there is lots of it or it is very heavy or awkward to load/lift.
V03.1 Back of van
V03.2 Manual Handling
V04 Site Arrival/Site Signage
Arrival at site, go through the Signage you will see (Red, Blue, Green, Yellow/Black) explain and give some examples i.e. the Blue Signage is Mandatory ‘Must Do’, you must wear PPE, Hard Hat, Safety Boots, High Vis, Etc.
V05 After Site/Safety Induction
After Induction (Alarms & emergency procedures, muster points, site specific requirements, welfare facilities, working with other contractors, what to do if something is wrong)
V06 First Aid Kit/Accident Reporting
Accident Reporting & First Aid, show & explain what you need to do when injured/hurt at work, fill in the Accident Report book, what information needs to be filled in, etc.
V06.1 First Aid Kit
V06.2 Accident Report Book
V07 Waste Disposal
Waste Disposal, explain that on site you normally get this info at induction or if not, you take it back to the office and sort through recycling most of it and the remaining non-recyclable stuff goes off to landfill
V08 Carbon Blueprint
Carbon Blue Print & how this affects you, use reducing paperwork with things like use of tablets, route planning of vans to keep milage use to a minimum
V08.1 Carbon Footprint
V08.2 Carbon BluePrint
V09 Fire Extinguishers
Fire Extinguishers, if possible, stand next to a fire point and explain the different fire extinguishers and what they can be used on
V09.1 Fire Extinguishers 1
V09.2 Fire EXTINGUISHERS 2
V10 Ladder Storage/Pre-User Inspection
Ladder/Roof Crawler, show & explain how the kit is stored/secured on/in the van, then carry out a pre-user check on the ladder, followed by what you would do if there was something incorrect/damaged. Then rig it correctly 1:4 and making sure it is secured or footed.
V10.1 Ladder Inspection
V10.2 Ladder Use
V10.3 Ladder Rigging
V11 Safety Harness Storage/Pre-User Inspection
Safety Harness, show & explain how the kit is stored on the van, then demonstrate & explain how you carry out a pre-user check on the harness and what you would do if something was wrong
V11.1 Safety Harness Pre-User Check 1
V11.2 Safety Harness Pre-User Check 2
V12 Safety Harness - Donning Harness
Safety Harness, putting the harness on correctly ensuring a tight but comfortable fit, if there is someone there get them to do a Buddy Check to make sure it’s okay, say what happens if you find something wrong
V14 Safety Harness
Safety Harness, show you clipping on to anchor points, explaining and connecting it to Permanent Anchor Point an eye bolt and/or Man safe System, make sure you explain you check the certification and test dates are still valid, on a man safe if you’re at a clients say you asked & checked the certification and have permission to use it. Then do another using a Temporary Anchor Point i.e. Using the short lanyard on a safety harness for the chest position to a ladder to ensure three points of contact or using a tested strop around permanent steelwork
V14.1 Permanent Anchor Points
V14.2 Proprietary Anchor Points 1
V14.3 Proprietary Anchor Points 2
V14.4 Temporary Anchor Points
V15 LP Standards
Describe the differences between a BSEN 62305 Class/LPL 4 & 2, you can also mention the basics to BS 6651
V16 Fall of Potential Test
Explaining & demonstrating whilst carrying out a Fall of Potential Test
V17 Through the System Test
Explaining & demonstrating whilst carrying out a Through the System Test
V18 Dead Earth Test
Explaining & demonstrating whilst carrying out a Dead Earth Test
V19 Continuity Test
Explaining & demonstrating whilst carrying out a Continuity Test
V20 Intentionally Left Blank
V21 Intentionally Left Blank
V22 Intentionally Left Blank
V23 Hazards Risks
List some risk hazards you would encounter on a site or in the workplace & how you report them
V24 Health Hazards
List a couple of health risks in the work place (Asbestos/Pigeon Droppings/Needles/Syringes)
V25 Site Behaviour
Give some examples of how your behaviour & actions affect others in the workplace
V26 Vehicle Security/Site Security
Give examples of how you secure the van to stop theft of materials, plant & access equipment and stop unauthorised access, at the end say that with large deliveries of materials that you sometimes have access to a secure site container/storage facility
V26.1 Van Site Security
V26.2 Van Site Security
V27 Keeping Work Area Clean & Tidy
Explain that when working why it is important to keep the work area clean & tidy, and how protect the area to minimize damage
V28 Process At End Of Task, Reports & Record Keeping, Signing Off
Show/explain what you do to when finished, witness testing, ensuring the install meets the specification, all the drawings are up date, all results are recorded, you have explained & got the site agent/Mgr to sign off they are complete
V29 Documentaion Office to Client
Explain what happens to the paperwork, handed back to the office where they prepare the O&M manual, including stuff like test certificate, specification, results & report, as installed drawing, maintenance schedule, etc this is all then sent off to the client.